BikeProMech

Bike Chain Sprocket Kit Replacement Cost in India (2026)

Available periodic service for this type bike
Bike Chain Sprocket Kit Replacement Cost in India (2026) – BikeProMech

A chain sprocket kit for a 100–125cc commuter bike like the Hero Splendor Plus costs from roughly ₹400 for aftermarket kits up to ₹1,428 MRP for Hero’s genuine kit. Kits for 150–200cc bikes like the Pulsar NS200 or Apache RTR 200 run about ₹1,400–₹2,900, and bigger bikes cost more. Labour is extra. Here’s how to tell when the kit is due and how to make the next one last longer.

What Does a Chain Sprocket Kit Cost in 2026?

A kit includes the chain, the front (drive) sprocket and the rear (driven) sprocket. These are prices listed by Indian sellers and brand stores. They vary by seller and offer, so use them as a guide:

BikeKitListed price
Hero Splendor+ (2012 onwards)Hero genuine chain sprocket kit₹1,428 MRP
Hero Splendor PlusAftermarket kits (Rolon and others)From about ₹400
Bajaj Pulsar NS200 / AS200Rolon chain & sprocket kitAbout ₹1,373–₹1,790
TVS Apache RTR 200 4VRolon chain sprocket kitAbout ₹2,920
Royal Enfield HimalayanRolon chain & sprocket kitAbout ₹2,303
KTM Duke 390Rolon brass chain sprocket kitAbout ₹3,250

Why the gap? Bigger bikes use heavier chains (often O-ring or brass-coated types) and larger sprockets. Genuine kits cost more than aftermarket ones but match the original specification.

Why Replace the Whole Kit, Not Just the Chain?

The chain and sprockets wear together. A new chain on worn, hooked sprocket teeth wears out fast and keeps making noise. A new sprocket with an old stretched chain has the same problem. That’s why mechanics replace them as a set.

Book doorstep bike service with BikeProMech – inspection from ₹199, verified mechanics, 10-day warranty

Prefer to talk? Call +91 90-5344-5344 or WhatsApp us.

How Do You Know Your Chain Sprocket Kit Needs Replacing?

  1. Constant noise: rattling or grinding that cleaning and oiling don’t fix. Our guide bike chain making noise: rattling vs squeaking explains the difference.
  2. Hooked or pointed sprocket teeth: healthy teeth are evenly rounded.
  3. Chain won’t stay adjusted: it goes slack again soon after tightening.
  4. Tight and loose spots: slack changes as you rotate the wheel.
  5. Chain lifts off the rear sprocket when you pull it at the back.
  6. Jerks when you open or close the throttle; also see bike jerking while accelerating.

How Long Does a Chain Sprocket Kit Last?

It varies with care far more than with kilometres. A chain that’s cleaned and lubricated regularly lasts much longer than one left dry and dirty. Hero’s maintenance chart for the Splendor range, for example, calls for inspecting, cleaning, lubricating and adjusting the chain every 2,000 km. Dust, rain and riding through water all shorten chain life. After a wet ride, clean and lube the chain as soon as possible.

What Affects the Final Bill?

FactorEffect on cost
Genuine vs aftermarket kitGenuine usually costs more
Bike size (100cc vs 200cc+)Bigger chains and sprockets cost more
Standard vs O-ring / brass chainO-ring and premium chains cost more
Labour and locationWorkshop or doorstep labour is added
Extra parts found wornFor example, a rubber damper or chain slider

How Can You Make Your Next Chain Kit Last Longer?

  • Clean and lubricate the chain on the schedule in your manual, and more often in rain or dust.
  • Keep chain slack within the range in your owner’s manual. Too tight is as bad as too loose.
  • Avoid hard launches and wheelies.
  • Get the chain checked at every periodic service.

Can a Chain Sprocket Kit Be Replaced at Home?

BikeProMech mechanics clean, lubricate and adjust chains at your doorstep. They also check the chain and sprockets for wear during a ₹199 doorstep inspection. If a new kit is needed, you get the estimate for parts and labour before any work begins. Wear parts are fitted only after you approve, and every job has a 10-day workmanship warranty.

Planning a full service? See the bike service price list, plus model guides for the Splendor Plus and Pulsar.

The Bottom Line

Commuter bike chain kits start at a few hundred rupees, while kits for 200cc and bigger bikes cost ₹1,400–₹3,250 or more. Always replace the chain and both sprockets together, and keep the chain cleaned, lubricated and correctly adjusted to make the next kit last.

Frequently Asked Questions

What is the price of a Splendor Plus chain sprocket kit?

Hero’s online store lists its genuine Splendor+ kit at ₹1,428 MRP. Aftermarket kits are listed from about ₹400.

Can I replace only the chain?

It’s not recommended. A new chain on worn sprockets wears out quickly. Replace the full kit.

How often should I lubricate my bike chain?

Follow your owner’s manual. Hero’s Splendor chart says every 2,000 km, and more often after rain or dusty rides.

Why is my chain noisy even after oiling?

It may be stretched, badly adjusted, or running on worn sprockets. A mechanic can check slack and tooth wear.

Does BikeProMech replace chain sprocket kits at home?

Our mechanics inspect, clean, lubricate and adjust chains at your doorstep and share an estimate for any parts before work starts.

Book a Chain Check at Your Doorstep

Noisy chain or jerky ride? Book a BikeProMech doorstep inspection and get a clear estimate before any work. Book online or call +91 90-5344-5344.

Available in Pune, Bangalore, Mumbai, Hyderabad, Chennai, Delhi and more.

Sources: Hero MotoCorp online store, Splendor+ chain sprocket kit; Riders Junction: Rolon chain sprocket kit prices.

GET MORE STUFF

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

we respect your privacy and take protecting it seriously